Required parts |
Part ID |
Required number |
Control board kit |
No.62 |
1 |
Sticker |
No.47 |
1 |
Heat sink |
No.48 |
1 |
Spacer |
No.50 |
4 |
M3 x 12mm screw |
No.22 |
4 |
Step 1. Cut the sticker into small pieces.
Step 2. Past the heat sink onto the chip of the A4988 drivers. The sticker is double sided adhesive.
Step 3. Insert the spacer into the 4 holes of the board from back to front.
Step 4. Moun the board on the left side panel with 4 M3 x 12mm screws.
⇦ Step 24 Home Step 26 ⇨