Required parts |
Part ID |
Required number |
Timing belt |
No.42 |
1 |
Belt bracket |
No.43 |
1 |
Step 1. Insert one end of the belt in the groove. Pay attention to the tooth mesh of the belt and the groove.
Step 2. Thread another end of the belt through the X motor end around the pulley.
Step 3. Threaded the belt through the belt driving wheel and put the driving wheel into the X idler end, lock it with a wing nut.
Step 4. Insert another end of the belt into the groove. Cut the spare part. Be sure of the length of the belt.
Step 5. Taut the belt and tighten the wing nut on the idle end.
⇦ Step 21 Home Step 23 ⇨