Assemble the Z-axis bottom mount
|Required parts||Part ID||Required number|
|Z Motor fixed plate||No.A4 A5||2|
|Z Motor support plate||No.A6 A7||4|
|M3 x16 screw||No.26||10|
|M3 square nut||No.16||10|
Step 1. It would be easier to mount the A4/A5 to A6 and A7 first, and then mount the assembled part to A1.
Step 2. Screw up the acrylic plates with M3 x 16 screws and M3 square nuts.
Note. The right and left bottom mount are different; the left one has a mount for the Z end stop. Please look at the following picture.