Required parts |
Part ID |
Required number |
450mm threaded rod |
No.5 |
2 |
M10 washer |
No.9 |
8 |
M10 hex nut |
No.13 |
8 |
M10 spring washer |
No.10 |
6 |
Connecting fender |
No.A14 |
2 |
Thread the nuts and washers into the two M10 threaded rods separately. The order should be:
Step 1. Thread the acrylic fender (Y plate connecting plate) in the middle.
Step 2. Thread the M10 washer >M10 nut >M10 nut >M10 nut <M10 nut <M10 spring washer <M10 washer in turn on the left
Step 3. Thread theM10 washer < M10 spring washer < M10 nut < M10 nut< M10 spring washer < M10 washer in turn on the right
Home Step 2 ⇨